Installing a Brick Paver Walkway or Bricks Pavers

The usage of Bricks or Pavers to create a pathway or patio area matches a house in a way that is unmatched. In addition, setting up a Brick or Paver sidewalk does not always need a pro.

The key to installing a Brick or Paver Walkway is to first correctly prepare the location where the bricks/pavers are to be set up. The area needs to be removed a minimum of a foot down, eliminating all topsoil and clay soil. In addition, string lines need to be strung on each side of the sidewalk. The string lines indicate the completed height of the sidewalk.
As soon as the area has been dug down, 3/4" gravel stone must be laid in and tamped down securely. The height between the tamped down sand and the stringline ought to equate to the density of the brick or paver.

Now that you have a stable base, position a 1" pipe or ledger board the length of the sidewalk on either side of the walkway. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will create a level area to lay the bricks/pavers.

Now location on the level sand/stone dust strips of plastic brick borders. Set up a work on both sides of the prepared area. These strips will serve as your pathway border and assistance to preserve the integrity and shape of the pathway. You can get these plastic strip borders at the majority of house enhancement shops. The strips should be anchored down with 12" galvinized nails. You should sink these nails into the ground and through the strips every foot.

The secret to laying the bricks/pavers is to guarantee that they interlock with each other. Always stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will again assist maintain the stability of the sidewalk.

Inevitably bricks/pavers will require to be cut or split when building the sidewalk. To really cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the spot where you desire to break the brick. If your pathway has curves you will need to buy/rent a wetsaw.

After setting up the bricks, develop the outside edges with additional sand, and then shovel in the topsoil and pack down firmly.
Lastly, spread stone dust over the brand-new sidewalk and sweep into the cracks. Repeat this process a number of times to guarantee the cracks are completely filled. This will complete the interlocking of the bricks and assist to eliminate any weed growth. Simply add yard seed to the outdoors edges and you need to have a stunning entryway to your home within a number of weeks.


In addition, installing a Brick or Paver sidewalk does not necessarily require a pro. The key to setting up a Brick or Paver Walkway is to very first correctly prepare the area where the bricks/pavers click here are to be installed. Now that you have a steady base, place a 1" pipe or ledger board the length of the pathway on either side of the pathway. These strips will act as your pathway border and aid to preserve the stability get more info and shape of the sidewalk. Inevitably bricks/pavers will require to be cut or split when constructing the pathway.

Leave a Reply

Your email address will not be published. Required fields are marked *